We offer two main panel categories: Standard panels – with straight edges. Panels with a clinker design – featuring specially shaped edges that conceal panel joints after installation and joint filling.

TG (Tongue & Groove) is a tongue-and-groove joint where the insulation layers overlap each other. This solution improves thermal continuity and helps reduce the risk of thermal bridges.

Absolutely. Our system is suitable for both new-build and renovation projects. The main requirement is a flat wall surface to ensure high-quality and reliable installation. Read more: https://koderus.com/news/renovation-or-new-construction-why-the-koderus-facade-system-is-a-universal-solution-for-both/

The price is calculated individually based on the selected panel category, colour and insulation thickness. Prices start from €50.88/m² (excluding VAT). Please contact us for a complete price list.

Installation costs typically range from €20 to €30 per m², depending on the selected solution and project complexity.

Yes. If you provide your project drawings (DWG file), we can prepare a preliminary estimate. If you do not have a DWG file, the estimate will be charged. However, if you purchase the KODERUS 2IN1 system, this cost will be deducted from your order.

Production time depends on the size and complexity of the order. Most orders are completed within 2–4 weeks, although production may be faster depending on seasonal demand and factory workload. Please contact us for current lead times.

Yes. We can arrange delivery directly to your project site. Delivery costs are calculated individually based on the order volume and destination.

The panels are bonded to the wall using mineral adhesive. Where EPS meets EPS, polyurethane foam adhesive is used. For maximum safety and stability, each panel is also mechanically fixed to the substrate through integrated stainless steel reinforcement strips embedded in the concrete. Installation video: https://www.youtube.com/watch?v=p3uaak_jVoQ&list=PLy0ryggl57G6OKSjPzlISKRGF8tIlHJTO&index=9

No. We do not carry out installation ourselves, but we can recommend experienced installation partners familiar with our system.

Installation on timber structures is possible using polyurethane adhesive foam. However, in this case the warranty does not apply. It is also necessary to independently evaluate condensation management solutions.

Corners are formed by joining two panels cut at a 45° angle.

Panels are cut directly on site according to the project requirements. The concrete layer is cut using an angle grinder with a diamond blade, while the insulation is cut with a hot knife.

Standard panels: 5 / 10 / 15 / 20 / 25 / 30 cm. Clinker-design panels: 10 / 15 / 20 / 25 / 30 cm. If you require a non-standard insulation thickness, such as 7 cm or 12 cm, we will calculate the price individually and find the most suitable solution for your project.

Yes. We can manufacture panels without insulation. However, no warranty is provided in this case. The warranty applies only to panels with insulation. The minimum insulation thickness is 2 cm.

Yes. The panels can be repainted whenever required.

Our customers' most popular and time-tested choice is white.

Our most popular and timeless patterns are F5 and F16.

Yes. We manufacture custom-size panels for projects starting from 500 m². Additional mould production costs apply to custom solutions.

As the manufacturer, we guarantee that our products comply with the Declaration of Performance (DoP), are safe to use, and meet all applicable building regulations. This means we are responsible for the quality and performance of our products in accordance with the technical documentation.

Yes. All our certificates and technical documentation are available in the Documents section.

KODERUS 2IN1 panels require very little maintenance. If necessary, unpainted surfaces can simply be cleaned with a low-pressure water spray.

Proper storage is very important. We provide a video demonstrating incorrect storage practices, along with a document outlining the mandatory storage requirements. Documents: https://koderus.com/wp-content/uploads/2025/10/Storage-of-panels-on-the-construction-place.-2025.pdf

Yes. We can produce a custom sample that you can take to your project site to evaluate the colour and texture before placing an order.

Our headquarters and production facility are located in Vilnius, Lithuania: Žirgų g. 21, Antežeriai. We also have an office in Warsaw, Poland: Bartycka 24 / Unit 163